- Limited Stock
- In Stock
Ignition Box, Ultra 6AL Plus, Digital CD, with Rev Limiter, Red, 4 6 or 8 Cylinders, Universal, Each
Ignition Box Output:
Capacitive discharge
Circuitry:
Digital
Rev Limiter:
Yes
Timing Retard:
Three-stage
Data Acquisition:
No
CD Voltage Output to Coil:
520-540 V
Current Draw:
0.8 amps per 1,000 rpm
Spark Output (millijoules):
135-150 mJ
Minimum Operating Voltage:
7 V
Maximum Operating Voltage:
28 V
Length (in.):
5.200 in.
Width (in.):
3.300 in.
Ignition Box Color:
Red
Coil Included:
No
Warranty:
1-year
Quantity:
Sold individually.
Notes:
Launch, burnout, and step retard activation inputs available. This ignition box has a built-in tri-step RPM rev limit controlled by the mobile app.
MSD Ultra 6AL Plus Ignition Boxes
The new Ultra 6AL Plus ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energywhich results in a loss of power or top end miss.)
MSD Ultra 6AL Plus ignition box details:
* High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery
* High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253
* Powerful capacitive discharge of multiple sparks improves performance
* Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM
* Increase spark series duration lasts for 18 of crankshaft rotation
* Easily installs on 4, 6, 8-cylinder engines with distributors
* Operates on most 7 to 28 volt electrical systems
* Connects to points, magnetic pickups, and hall/crank input distributors
* Bluetooth connectivity to mobile app interface for settings and monitors
* MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product
* Straight USB port to easily connect to MSDView using a laptop
* Fully protected against an open coil, shorted coil and open load
* Compact design full MSD power
* Quickens throttle response and improves starting
* Tach Output
* Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app
* Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value
* Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation
* Programmable Start Retard through rotary switches: 0, 10, 20 degrees
* Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders
* Alerts and monitors available
* High level of security connection from phone to Ignition box (encryption), including sequence in push button implementation
* Maximum programmable retard of 35 degrees
* Programmable timing curves in 2D plots or 3D tables (RPM vs Timing vs MAP Pressure); you can plot the 3-D graph and edit a table 20x20 either from mobile app (phone) or from MSDView (laptop)
* Programmable Launch Timing (seconds vs degrees after launch wire activation)
* MAP sensor interface up to 400 kPA (58 psi / 4 Bars)
* Capable of programming cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)